Справочник Пользователя для RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router
Chapter 8
Scenario 2: Business user with TOS marking.
E-NIT-CTC-20041213-0013 v0.5
113
Queues
As seen in the introduction we will need an overflow of packets in the real time
queue to a lower priority queue (WFQ4)when the EF traffic is exceeding 50% of the
bandwidth.
To do so proceed as followed:
queue to a lower priority queue (WFQ4)when the EF traffic is exceeding 50% of the
bandwidth.
To do so proceed as followed:
1
Go to the IP QoS page and select the Queues tab
Expert mode -> IP Router -> IP QoS
You will now see a list of all queues per PVC.
Since we are using PVC atm_pvc_0_35 to connect to the internet we will have to
enable Propagation for the highest queue of this PVC.
Since we are using PVC atm_pvc_0_35 to connect to the internet we will have to
enable Propagation for the highest queue of this PVC.
2
Check the Propagate checkbox next to queue 5 of atm_pvc_0_35.
3
Click Save All to make the changes permanent.
4
The last thing that we need to do is bring down the ATM interface in order for
the new parameters to become active. This can be done in two way’s:
the new parameters to become active. This can be done in two way’s:
By switching the modem off and on again.
By opening the Speedtouch menu on the GUI and selecting RESTART
This will restart the modem without losing the configuration.
This will restart the modem without losing the configuration.