Справочник Пользователя для RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router

Packet Classification and Labelling

E-NIT-CTC-20041213-0013 v0.5

Bridgeport

The bridgeport number can be found in the eth subgroup. Under the eth bridge 
subgroup. Execute the following CLI command to find the bridgeport number:

The command will give an output like this :

Addr

The following parameter is the only parameter used when selecting ip as type.

Tos

All of the following parameters can be used to configure an expression of the type 
serv.

Precedence

bridgeport value

Description

number

A bridge port can be selected by using the bridge port 
number

{Administrator}=>:eth bridge iflist

OBC       : dest : Internal
            Connection State: connected   Retry: 10
            Port: OBC

PortState: forwarding

Interface: up

            RX bytes: 24774      frames: 163       

TX bytes: 0          frames: 0            dropframes: 0 

ethport1  : dest : ethif1
            Connection State: connected   Retry: 10
            Port: ethport1

PortState: forwarding

Interface: up

RX bytes: 0          frames: 0         

            TX bytes: 27352      frames: 163          dropframes: 0 

addr value

Description

ip-range or address

The IP address or range to which the expression is 
related.

tos value

Description

number (0..255)

The tos byte value can also be used to define an 
expression related to this value.

precedence value

Description

routine,priority, 
immediate,flash, flash-
override, CRITICECP, 
internetwork-control, 
network-control

One of these values can be used to define an 
expression related to the precedence in the IP packet.

number 

Also a number can be used to define an expression 
related to the precedence in the IP packet.