Справочник Пользователя для RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router

Meters, queues and IPQoS

E-NIT-CTC-20041213-0013 v0.5

Meter stop command

By using the stop command a meter can be deactivated.
For example: the command below will stop the meter with name “my_meter”

To check if the meter is stopped or not you can use the list command.

Meter flush command

The flush command can be used to delete all meters defined by a single command.
For example: the command below will delete all meters defined.

Meter stats command

To view the meter statistics ( number of packets dropped / marked) the stats 
command can be used.
For example: the command below will show the statistics for the meters defined.

The output of this command will look like this:

Execute following command to clear the stats counters:

This command will reset the stats meters 

{Administrator}=>:ipqos meter stop name my_meter

{Administrator}=>:ipqos meter list
my_meter [STOPPED]: LABEL:  INTF: 
DROP : droprate      : 102400kbps   burst: 64KB         action: drop
MARK : markrate      : 102400kbps   burst: 64KB         action: count
tosmarking    : enabled      type : tos          tos   : 0
classification: decrease     class: 0

The meter listed above is now in-active as it’s state is [STOPPED]

{Administrator}=>:ipqos meter flush

{Administrator}=>:ipqos meter stats 

Name                             # packets       # packets       # packets      
                                   accepted        dropped         marked       
test2                             75

5

40

{Administrator}=>:ipqos meter clear

Name                             # packets       # packets       # packets      
                                   accepted        dropped         marked       
test2                             0

0

0