Справочник Пользователя для RCA 605
25
E-DOC-CTC-20051017-0151 v1.0
Chapter 2
Local Network Setup
Registering clients via
the association button
Proceed as follows to register new wireless network clients via the association
button:
button:
1
Push the Association button on the SpeedTouch™ back panel for at least two
seconds.
seconds.
The WLAN LED toggles between green and red.
The ACL will be unlocked for a time frame of one minute. Any new wireless
client successfully attempting to connect to the SpeedTouch™ (having the
correct wireless settings, that is the network name and, if required, the
network key) within the time frame of one minute, will be added to the table.
The SpeedTouch™ automatically saves your current configuration at the end
of the registration phase.
client successfully attempting to connect to the SpeedTouch™ (having the
correct wireless settings, that is the network name and, if required, the
network key) within the time frame of one minute, will be added to the table.
The SpeedTouch™ automatically saves your current configuration at the end
of the registration phase.
2
Successfully registered stations are associated to the SpeedTouch™ WLAN.
Depending on your WLAN client adapter, a wireless icon may become green
or a message similar to the following may appear: “Successfully joined
Wireless network SpeedTouch123456”.
Depending on your WLAN client adapter, a wireless icon may become green
or a message similar to the following may appear: “Successfully joined
Wireless network SpeedTouch123456”.
3
The wireless clients will be added to the SpeedTouch™ ACL.
4
After one minute the ACL is locked.
Some WLAN clients do not automatically join a WLAN. If so, follow
the instructions for the WLAN client software to initiate the
association.
the instructions for the WLAN client software to initiate the
association.
The registration procedure can be repeated as often as needed.