Справочник Пользователя для Transition Networks TN-GLC-SX-MM

TN-GLC-xx-xx SFPs

2

Tech Support:  1-800-260-1312 -- International:  00-1-952-941-7600—24 hours

1000Base-BX, Simplex LC 1310 nm  Tx/1490 nm Rx,
single mode, single fiber 10 km (6.2 miles)* 

1000Base-BX, Simplex LC 1490 nm  Tx/1310 nm Rx,
single mode, single fiber 10 km (6.2 miles)* 

1000Base-BX, Simplex LC 1310 nm  Tx/1490 nm Rx,
single mode, single fiber 40 km (24.9 miles)* 

1000Base-BX, Simplex LC 1490 nm  Tx/1310 nm Rx,
single mode, single fiber 40 km (24.9 miles)* 

1000Base-BX, Simplex LC 1310 nm  Tx/1490 nm Rx,
single mode, single fiber 60 km (37.3 miles)* 

1000Base-BX, Simplex LC 1490 nm  Tx/1310 nm Rx,
single mode, single fiber 60 km (37.3 miles)* 

TN-GLC-FE-100BX-U 100Base-BX, Simplex LC 1310 nm  Tx/1550 nm Rx, 

single mode, single fiber 20 km (12.4 miles)* 

TN-GLC-FE-100BX-D 100Base-BX, Simplex LC 1550 nm  Tx/1310 nm Rx , 

single mode, single fiber 20 km (12.4 miles)* 

100Base-BX, Duplex LC 1300 nm, multimode 
2 km (1.2 miles)* 

100Base-BX, Duplex LC 1310 nm, single mode 
20 km (12.4 miles)* 

TN-GLC-GE-100FX*** 100Base-BX, Duplex LC 1300 nm, multimode 

2 km (1.2 miles)* 

1000Base-LX, 1550 nm, single mode 
80 km (49.7 miles)* 

1000Base-LX, single mode 
80 km (49.7 miles)* 

27 =1270nm

39 = 1390nm

53 = 1530nm

29 = 1290nm 

41 = 1410nm

55 = 1550nm

31 = 1310nm 

43 = 1430nm

57 = 1570nm

33 = 1330nm

47 = 1470nm

59 = 1590nm

35 = 1350nm 

49 = 1490nm

61 = 1610nm

37 = 1370nm

51 = 1510nm

λ

c

*Unless otherwise indicated, the distances listed are the typical maximum cable
distance.  The actual maximum cable distances are dependent upon the physical
characteristics of the network installation.

**Transition Networks' SFP modules fully comply with the Multi-Sourcing
Agreement (MSA). This compliance allows our SFP modules to be used in other
MSA compliant SFP platforms without  problems. In addition, TN SFP modules
are also compatible with all Cisco SFP-based routers and switches, as well as its
IOS software. TN SFP modules ARE NOT Cisco OEM brand modules.

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

3

To install the SFP module into a network switches media converter, do the
following:

1.

Position the module at the installation slot so that the label faces up.

2.

Carefully slide the module into the installation slot, aligning it with the internal
installation guides.

1.

Locate or build 1000Base-T compliant copper cables with male, RJ-45
connectors installed at both ends.

2.

Connect the RJ-45 connector at one end of the cable to the RJ-45 port on the
media converter.

3.

Connect the RJ-45 connector at the other end of the cable to the RJ-45 port on
the other device.

RJ-45 port

on the other device

RJ-45 port

on the media 

converter

***Provide 100Base-FX interface when plugged into a gigabit SFP slot on Cisco
catalyst 3750, 3560, and 2970 series switches.

Note: Install simplex or single fiber SFP models in pairs in the same network where

one is the local SFP and the other is the remote SFP.