Справочник Пользователя для Transition Networks SSEFE10XX-10X

* Typical maximum cable distance. Actual distance is dependent upon the

physical characteristics of the network. (TX) = transmit, (RX) = receive

The SSEFE10xx-10x media converter is designed to be installed in pairs, where one
is the local media converter and the other is the remote. For example, a local
SSEFE1011-100 converter is connected, via fiber, to a remote SSEFE1011-100
converter.

For a single fiber network, a local SSEFE1029-100 is connected, via fiber, to a
remote SSEFE1029-101 converter.

Installation  . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications  . . . . . . . . . . .6
Technical Specifications  . . . . . . . .8
Troubleshooting  . . . . . . . . . . . . . .9
Compliance Information . . . . . . .12

User’s Guide

SSEFE10xx-10x

Stand-Alone Media Converter
• Switchable Ethernet and Fast Ethernet
• 10 Mb/s Copper to Fiber
• 100 Mb/s Copper to Fiber

Transition Networks SSEFE10xx-10x series
Ethernet / Fast Ethernet media converter is a
10Mbps or 100Mbps switch-selectable media

converter. Both the copper and fiber links operate at the same speed setting via a
hard set with a dip switch, so the media converter operates at either 10 Mb/s
copper to fiber or 100 Mb/s copper to fiber.

Part Number

Port One - Twisted-Pair
Copper

Port Two - Fiber Optic

SSEFE1012-100

RJ-45, 100 m (328 ft)*

ST, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*

SSEFE1014-100

RJ-45, 100 m (328 ft)*

SC, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*

SSEFE1015-100

RJ-45, 100 m (328 ft)*

SC, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*

SSEFE1022-100

RJ-45, 100 m (328 ft)*

ST, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*

SSEFE1029-100

RJ-45, 100 m (328 ft)*

SC, 1310 mn (TX)/1550 nm (RX)
single fiber, 20 km (12.4 miles)*

SSEFE1029-101

RJ-45, 100 m (328 ft)*

SC, 1550 mn (TX)/1310 nm (RX)
single fiber, 20 km (12.4 miles)*