Справочник Пользователя для Toshiba 6000 Series
55
Getting Started
Adding memory
Installing a memory module
Additional memory modules can be installed in the memory
expansion slots on the base of the computer. You will need a
standard Phillips no.1 screwdriver for this procedure.
expansion slots on the base of the computer. You will need a
standard Phillips no.1 screwdriver for this procedure.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Installing a memory module with the computer’s
power on may damage the computer, the module, or both.
power on may damage the computer, the module, or both.
The computer has two memory expansion slots—Slot A and
Slot B. You can install one or two memory modules.
Slot B. You can install one or two memory modules.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1
If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the computer.
4
Remove the battery.
5
Close the display panel and turn the computer upside down to
locate the expansion memory slot cover to the memory slot.
locate the expansion memory slot cover to the memory slot.