Справочник Пользователя для Avaya G450

The Advanced tab of the Channel Groups dialog box provides information about the channels 
that comprise the selected Channel Group and the Channel Group’s speed factor.

To view the Advanced tab of the Channel Group dialog box:

1. Click a Channel Group icon in the Chassis View. A list of Channel Groups on the port 

appears.

2. Click the Channel Group you want to configure. The Channel Group dialog box opens with 

the Channel Group tab.

The bit pattern used to signify an idle line. Possible patterns include:

●

●

●

The effective bandwidth of the PPP session.

The administrative state of the PPP session:

●

Enable - The Channel Group is enabled.

●

Disable - The Channel Group is disabled.

The state of VoIP queuing on the PPP session. VoIP queuing 
changes the length of the high priority queue providing support for 
the configuration of a maximum VoIP delay. Possible states include:

●

On - Standard VoIP queuing is active on the PPP session.

●

Off - VoIP queuing is not active on the PPP session.

●

Fair-VoIP Queue - VoIP weighted fair queuing is active in the 
PPP session.

The operational status of the interface. Possible statuses include:

●

Up - The interface is up and can transmit and receive packets.

●

Down - The interface is down due to some failure, and cannot 
transmit or receive packets.

●

Testing - The interface is in testing mode and cannot transmit 
or receive regular data.

●

Standby - The interface is a backup interface and cannot 
transmit or receive packets unless the primary interface it 
backs up fails.

●

Disabled - The interface is disabled. It cannot transmit or 
receive packets.

●

Partially Down - The interface is up. However, some 
interfaces (or PVCs) layered on top of this interface are Down. 
Some packets can be transmitted and received.