Справочник Пользователя для Avaya G450

The following parameters are displayed:

You can modify RIP Global Parameters by checking boxes as desired.

To define and display RIP interfaces:

Select IP Route > RIP > RIP Interfaces. The RIP Interfaces window opens.

The following parameters are displayed:

RIP Global Status The status of RIP on the device. If checked, RIP is enabled. If not 

checked, RIP is disabled on all interfaces, regardless of the settings in the 
RIP Interfaces window.

Controls redistribution of routes from OSPF to RIP. If checked, all routes 
learned via OSPF are advertised into RIP.

Controls redistribution of static routes into RIP. If checked, the static routes 
inserted into the IP Routing Table are advertised into RIP, according to the 
"Leak Route" definition for each static route.

The amount of time between each RIP periodic update.

The amount of time after which a route becomes invalid in the routing 
table.

The name assigned to the selected IP interface.

The IP address of the interface. 
If the IP address is unnumbered this field returns a value of N/A.