Справочник Пользователя для ASUS WL330N3G

2.  Specify a network name or SSID (Service Set Identifier), which is a unique 

identifier attached to packets sent over WLAN.

3.  Select a security level to enable encryption methods:
 

Low (None)

 

Medium (WEP-64bits)

 

Medium (WEP-128 bits)

 

High (WPA-PSK)

4.  Select WAN Connection Type from the drop-down list. You are required to 

enter the user name and password if you are using PPPoE, PPTP, or L2TP 

connection. Contact your Internet Service Provider (ISP) for the user name 

and password.

5.  Click Apply to save the settings.

For more details on setting up the advanced functions, refer to the section 4.3 

Advanced Setting.

After setting the ASUS WL-330N3G in Router mode, you need to connect the 

WL-330N3G’s LAN port to an ADSL modem and connect your computer to  

WL-330N3G’s SSID via wireless connection.

In the Access Point (AP) mode, you can connect the Ethernet port and your 

wireless devices into the same local area network (LAN).

To configure the ASUS WL-330N3G in Access Point/AP mode:

1.  Click the Access Point tab. The Access Point page appears.