Справочник Пользователя для ASUS WL-520G

WL-520g Wireless Router User Manual

4.Internet is not accessible

• Check the lights on ADSL modem and Wireless Router
• Check the "WAN" led on the router is on or not. If the led isn't on, please change

the cable to try again.

4.1. When ADSL Modem "Link" light is on (not blinking), this means

Internet Access is Possible.

• Restart your computer.
• Reconfigurate the settings for ASUS Router and please refer to the Quick Setup

Guide of the WL-520g.

• Check whether the WAN LED on the router is on or not.
• Check wireless encryption settings
• Check whether the computer can get the IP address or not. (via both wired

network and wireless network)

• Check whether your Web browser is configurated to use the local LAN, and is

not configured to use a proxy server.

4.2. If the ADSL "LINK" light blinks continuously or stays off,

Internet access is not possible - the Router is unable to

establish a connection with the ADSL network.

• Check that your cables are connected properly.
• Disconnect the power cable from the modem, wait a few minutes, then reconnect

the cable.

• If the ADSL light continues to blink or stays off, contact your ADSL service

provider.

5.Network name or encryption keys are unknown

• Can try to setup the wired connection for setup the wireless encryption again.
• Can do the hard reset on the router.

6.How to reset to defaults

The following are factory default values. These values will be present when you ﬁrst

receive your ASUS Wireless Router, if you push the restore button on the back of the

ASUS Wireless Router over 5 seconds, or if you click the “Restore” button on the “

Factory Default” page under “ Advanced Setup”.

User Name: admin

Subnet Mask:

255.255.255.0

Password: admin

DNS Server 1: 192.168.1.1

Enable DHCP: Yes (if plug in Wan cable) DNS Server 2: (Blank)
IP address: 192.168.1.1

SSID:

default

Domain Name: (Blank)