Справочник Пользователя для ASUS CUW(E)-FX
7. APPENDIX
7. APPENDIX
ASUS LCD-I Module
ASUS CUW(E)-FX User’s Manual
113
7.1 ASUS LCD-I Controller Module
The ASUS LCD-I controller module allows you to connect a digital flat panel to
your PC. This controller module transmits sharp, bright images by eliminating digi-
tal-to-analog and analog-to-digital conversions, which can accumulate noise and
degrade image quality.
your PC. This controller module transmits sharp, bright images by eliminating digi-
tal-to-analog and analog-to-digital conversions, which can accumulate noise and
degrade image quality.
7.1.1 Installation Procedure
1. You must have an ASUS motherboard with a pair of LCD-TV headers.
2. Align the LCD-I module’s LCDTV0 and LCDTV1 connectors over the
2. Align the LCD-I module’s LCDTV0 and LCDTV1 connectors over the
motherboard’s LCD-TV headers, and press firmly.
3. Connect the digital LCD cable from the LCD and serial combination bracket to
the DFP connector on the LCD-I module.
4. Secure the bracket to the system chassis with a screw.
5. Plug the signal cable of your digital flat panel into the DFP connector on the
5. Plug the signal cable of your digital flat panel into the DFP connector on the
bracket (as shown below).
Digital
Flat
Panel
to LCD-I Card
to COM2 Header
Using the LCD-I Controller Module
NOTE: The LCD-I controller module can work with your LCD panel without any
driver. However, if you want to have full-screen display, please set up the VGA
driver that comes with your motherboard’s support CD.
driver. However, if you want to have full-screen display, please set up the VGA
driver that comes with your motherboard’s support CD.
(Front V iew)
LCD-I Module
(Back V iew)
DFP
Connector
LCDTV1
LCDTV0