Справочник Пользователя для ASUS CUW(E)-FX

3. HARDWARE SETUP

Motherboard Settings

Before using your computer, you must complete the following steps:

 Make sure that you unplug your power supply when adding or

removing system components. Failure to do so may cause severe damage to
your motherboard, peripherals, and/or components. The onboard LED (see 3.1
Motherboard Layout for location) when lit acts as a reminder that the system is
in suspend or soft-off mode and not powered OFF.

This section explains in detail how to change your motherboard’s function settings
through the use of switches and/or jumpers.

 Computer motherboards and expansion cards contain very delicate

Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a metal
object, such as the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or con-

nectors, or other components.

4. Place components on a grounded antistatic pad or on the bag that came with the

component whenever the components are separated from the system.