Справочник Пользователя для ASUS RTAC68U

The System page allows you to configure your wireless router 

settings.

To set up the System settings:
1.  From the navigation panel, go to Advanced Settings > 

Administration > System tab.

2.  You can configure the following settings:

•  Change router login password:  You can change the 

password and login name for the wireless router by entering 

a new name and  password.

•  WPS button behavior:  The physical WPS button on the 

wireless router can be used to activate WPS or switch off 

wireless networking. 

•  Time Zone:  Select the time zone for your network.
•  NTP Server:  The wireless router can access a NTP (Network 

time Protocol) server in order to synchronize the time.

•  Enable Telnet:  Click Yes to enable Telnet services on the 

network. Click No to disable Telnet.

•  Authentication Method:  You can select HTTP, HTTPS, or 

both protocols to secure router access.

•  Enable Web Access from WAN:  Select Yes to allow devices 

outside the network to access the wireless router GUI 

settings. Select No to to prevent access.

•  Only allow specific IP:  Click Yes if you want to specify the IP 

addresses of devices that are allowed access to the wireless 

router GUI settings from WAN. 

•  Client List:  Enter the WAN IP addresses of networking 

devices allowed to access the wireless router settings. This 

list will be used if you clicked Yes in the Only allow specific 

IP item.

3.  Click Apply.