Справочник Пользователя для ASUS DSL-N11

1

Chapter 3: Configuring the clients   

 

 

 

 

 

 

 

 

 

DSL-N11

To access the ASUS Wireless Router, you must have the correct TCP/IP settings on 

your wired or wireless clients. Ensure that the clients’ IP addresses are within the same 

subnet as the ASUS Wireless Router.

By default, the ASUS Wireless Router integrates the DHCP server function, which 

automatically assigns IP addresses to the clients in your network.

But in some instances, you may want to manually assign static IP addresses on 

some of the clients or computers in your network rather than automatically getting 

IP addresses from your wireless router.

Follow the instructions below that correspond to the operating system installed on 

your client or computer.

Note: If you want to manually assign an IP address to your client, we recommend that you use 

the following settings: 

 

  •  IP address: 19.18.1.xxx (xxx can be any number between  and 54. Ensure that the IP  

    address is not used by another device) 

 

  •  Subnet Mask: 55.55.55.0 (same as the ASUS Wireless Router) 

 

  •  Gateway: 19.18.1.1 (IP address of the ASUS Wireless Router) 

 

  •  DNS: 19.18.1.1 (ASUS Wireless Router) or assign a known DNS server in your network