Справочник Пользователя для ASUS RX3141

 

In addition to handling the DSL connection to your ISP, the RX3141 can provide a variety of services to your 
network. The device is pre-configured with default settings for use with a typical home or small office network. 

Table 3.2 lists some of the most important default settings; these and other features are described fully in the 
subsequent chapters. If you are familiar with network configuration settings, review the settings in Table 3.2 to 
verify that they meet the needs of your network. Follow the instructions to change them if necessary. If you are 
unfamiliar with these settings, try using the device without modification, or contact your ISP for assistance. 

Before you modifying any settings, review Chapter 4 for general information about accessing and using the 
Configuration Manager program. We strongly recommend that you contact your ISP prior to changing the 
default configuration. 

DHCP server enabled with the 
following pool of addresses:  

192.168.1.100 through 
192.168.1.149 

The RX3141 maintains a pool of private IP 
addresses for dynamic assignment to your 
LAN computers. To use this service, you 
must have set up your computers to 
accept IP information dynamically, as 
described in Part 2 of the Quick Start 
Guide. See section 6.1 for an explanation 
of the DHCP service. 

Static IP address: 192.168.1.1 

subnet mask: 255.255.255.0 

This is the IP address of the LAN port on 
the RX3141. The LAN port connects the 
device to your Ethernet network. Typically, 
you will not need to change this address. 
See section 5.1.1 LAN IP Address for 
instructions.