Справочник Пользователя для ASUS RX3141

69 

Following describes the procedure to setup a special application for Quick Time. 

1.  Open the Special Application configuration page, as shown in Figure 10.5, by double clicking the 

 

ΠSpecial Application menu. 

2. Select 

 from the Enable drop-down list and the check the check box to activate this 

policy. Note that the application name, outgoing and incoming port range are automatically 
selected. 

3. Click 

 to save the settings. 

4.  The RX3141 has a default outbound ACL rule to forward all the outbound traffic to the external 

networks. This default outbound ACL rule allows any one to use application defined in the Special 
Application configuration page. If this is what you want, skip this step. However, for security 
concerns or any other reasons, you may want to restrict the use of these applications to a 
particular group of users. Then configure an outbound ACL rule to control outbound access as 
illustrated in Figure 10.6. This example restricts the access to hosts in the IP address range from 
192.168.1.110 to 192.168.1.115. Note that you must remove the default firewall outbound ACL 
rule for the access restriction to work because the default outbound ACL rule allows any one to 
use any applications setup in the Special Application configuration page. To delete the default 
outbound ACL rule, just click the   icon in front of the default ACL rule in the Outbound ACL Rule 
table located in the Outbound ACL Rule configuration page (as shown in Figure 10.7). For details 
on configuring an outbound ACL rule, please refer to the section 9.5 Configuring Outbound 
ACL Rules

.