Справочник Пользователя для ASUS RTN12B1

37

Chapter : Installing the utilities   

 

 

 

 

 

 

 

 

 

RT-N1 B1

Firmware Restoration is used on an ASUS Wireless Router that failed during its 

firmware upgrading process. It uploads the firmware that you specify. The process 

takes about three to four minutes.

To launch the rescue mode and use the Firmware Restoration utility:
1.  Unplug the wireless router from the power source.
.  Hold the Restore button at the rear panel and simultaneously re-plug the 

wireless router into the power source. Release the Restore button when the 

Power LED at the front panel flashes slowly, which indicates that the wireless 

router is in the rescue mode.

3.  From your computer’s desktop, click Start > All Programs > ASUS Utility > 

RT-N12 B1 Wireless Router > Firmware Restoration.

Important: Launch the rescue mode before using the Firmware Restoration utility.

Note: This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless 

Router. Normal firmware upgrades must be done through the web interface. Refer to  

Chapter 4: Configuring via the web GUI for more details.

4.  Specify a firmware file, then click Upload.