Справочник Пользователя для Avaya X330WAN

Chapter 6

X330WAN CLI Commands

98

Avaya X330WAN User’s Guide

Use the

 reset 

command to restart the system.

If you want to keep changes you made to the current running configuration, use the

 

copy running-config startup-config 

command first.

You should perform a reset after downloading software to the device.

X330WAN-2DS1-1(super)# reset

This command will reset the module and may disconnect your telnet 

session.

*** Reset the device *** - do you want to continue (Y/N)? y

Connection closed by foreign host.

Use the 

set boot bank

 command to configure the software bank from which the 

device boots at the next boot process. 

 <value>

X330WAN-2DS1-1(super)# set boot bank bank-a

Boot bank set to bank-a

value

{bank-a | bank-b}