Справочник Пользователя для Avaya X330WAN
Interface Serial CLI Commands
Avaya X330WAN User’s Guide
139
show queueing
Use the
show queueing
command to display the priority queue size, in packets.
Syntax
show queueing
[Serial <if-number>]
Parameters
Example
X330WAN-2DS1-1(super)# show queueing Serial 1
shutdown (X330WAN-2USP Serial interface context)
Use the
shutdown
command to shutdown the selected interface. The
no
form of this
command activates the selected interface.
Note:
This command is executed from the Serial, Loopback, Fast Ethernet, and
Console interfaces.
Syntax
[no] shutdown
Note:
The
no shutdown
option is not available in the Console interface.
transmitter-delay (X330WAN-2USP Serial interface context)
Use the
transmitter-delay
command to set the minimum number of flags
needed to recognize the end of one data frame. The
no
form of this command
restores the default value, 0 flags, which is the shared flag mode.
Syntax
[no] transmitter-delay
<number>
Parameters
Example
X330W-2USP-1(super-if:Serial2)# transmitter-delay 2
if-number
The port number of this interface, either 1 or 2.
number
An integer from 0-15. The minimum number of flags for recognizing
the end of one data frame and the beginning of the next.
the end of one data frame and the beginning of the next.