Справочник Пользователя для Avaya X330WAN

Frame Relay Configuration CLI Commands

Avaya X330WAN User’s Guide

145

Use the

 frame-relay lmi-n392dte 

command to set the LMI error threshold. The 

no

 form of this command sets the error threshold to the default value (3).

<threshold>

X330W-2USP-1(super-if:Serial2)# frame-relay lmi-n392dte 6

Use the

 frame-relay lmi-n393dte 

command to set the monitored event count. 

The 

no

 form of this command sets the monitored event count to the default value 

(4).

<events>

Set the value for this counter greater than the 

 value.

X330W-2USP-1(super-if:Serial2)# frame-relay lmi-n393dte 8

Use the

 frame-relay priority-dlci-group 

command to define a priority group 

of DLCIs on a sub-interface. The 

no

 form of this command deletes the priority group 

of DLCIs on the sub-interface.

<DLCI1> [<DLCI2> [<DLCI3> 

[<DLCI4>]]]

threshold

The error threshold value, an integer from 1 to 10.

events

The monitored error count value, an integer from 1 to 10.