Справочник Пользователя для Avaya X330WAN

Chapter 6

X330WAN CLI Commands

164

Avaya X330WAN User’s Guide

Layer 3 CLI Commands

This section contains a list of all Layer 3 related CLI commands.

Use the

 arp 

command to add a permanent entry to the Address Resolution 

Protocol (ARP) cache. The

 no 

form of this command removes an entry, either a 

static entry or a dynamically learned entry. 

<ip-address> <mac-address>

To add a permanent entry for station 192.168.7.8 to the ARP cache:

Router (configure)# arp 192.168.7.8 00:40:0d:8c:2a:01

To remove an entry from the ARP cache for the station 192.168.13.76:

Router (configure)# no arp 192.168.13.76

Use the arp timeout command to configure the amount of time that an entry 
remains in the ARP cache. To restore the default value, 14400, use the 

no

 form of this 

command.

 <seconds>

To set the ARP timeout to one hour:

X330WAN-2DS1-1(configure)# arp timeout 3600

To restore the default ARP timeout:

Router-N(configure)# no arp timeout

ip-address

IP address, in dotted decimal format, of the station.

mac-address

MAC address of the local data link.

seconds

The amount of time, in seconds, that an entry remains in the ARP 
cache. Maximum value is 604800.