Справочник Пользователя для Avaya X330WAN
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
167
default-metric (Router-OSPF context)
Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 20.
routes. The no form of this command restores the default. The default metric is 20.
Syntax
[no] default-metric
<default metric>
Parameters
Example
X330WAN-2DS1-1(configure router:ospf)# default-metric 50
default-metric (Router-RIP Mode)
Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 1.
routes. The no form of this command restores the default. The default metric is 1.
Syntax
[no] default-metric
<default metric>
Parameters
Example
X330WAN-2DS1-1(configure router:rip)# default-metric 5
distribution-list (Router-RIP Mode)
Use the distribution-list command to filter incoming/outgoing networks in
route updates. The
route updates. The
no
form of this command deactivates the filter.
Syntax
[no] distribution-list
<access-list-number> <type> [<interface-
type><interface-number>|<protocol>]
default metric
An integer from 1 to 65535.
default metric
The interface RIP route metric value. The range is 1 to 16.