Справочник Пользователя для Avaya X330WAN
Chapter 6
X330WAN CLI Commands
190
Avaya X330WAN User’s Guide
ip vrrp primary
Use the ip vrrp primary command to set the primary address that is used as
the source address of VRRP packets for the virtual router ID. The no form of this
command restores the default primary address for the virtual router instance. By
default, the primary address is selected automatically by the device.
the source address of VRRP packets for the virtual router ID. The no form of this
command restores the default primary address for the virtual router instance. By
default, the primary address is selected automatically by the device.
Note:
This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp
<vr-id> primary <ip-address>
Parameters
Example
ip vrrp 1 primary 192.168.66.23
ip vrrp priority
Use the ip vrrp priority command to set the virtual router priority value
used when selecting a master router. The no form of this command restores the
default value.
used when selecting a master router. The no form of this command restores the
default value.
Note:
This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp
<vr-id> priority <pri-value>
Parameters
Example
X330WAN-2DS1-1(configure)# ip vrrp 1 priority 10
vr-id
Virtual Router ID, an integer from 1 to 255.
ip-address
Primary IP address of the virtual router. This address should
be one of the router addresses on the Fabric.
be one of the router addresses on the Fabric.
vr-id
Virtual Router ID, an integer from 1 to 255.
pri-value
The priority value, an integer from 1 to 254.