Справочник Пользователя для Avaya X330WAN

Policy CLI Commands

Avaya X330WAN User’s Guide

217

Use the

 ip simulate 

command to check the Policy for a simulated packet. The 

command contains the addressed list number and the packet parameters.

This command is executed from the Serial, Loopback, Fast Ethernet, and 

FabricFastEthernet interfaces.

 

<policy-list-number> <direction> [<priority>] 

[<dscp-value>]<source> <destination> [<protocol> [<source 

port> <destination port> [<established>]]]

X330WAN-2DS1-1(config-if:FastEthernet1)# ip simulate 100 in 

policy-list-number

An integer from 100 to 149, where 0 is the default list.

direction

in|out

priority

fwd0|fwd1|..|fwd7

dspc value

dscp0|dscp1|..|dscp63

source

Source IP address.

destination

Destination IP address.

protocol

ip|tcp|udp|

integer from 1 to 255.

source port

An integer from 1 to 65535.

destination port

An integer from 1 to 65535.

established

Value of TCP established bit.