Справочник Пользователя для Barco 8x8

GUI Operation

Click the Grouping Tab on the MatrixPRO Control application.  A sample tab is shown 
below: 

Figure 4-7.  Grouping Tab  (sample)

The MatrixPRO routers can be set up to "lock-out" input sources that are incompatible with 
certain output display devices.  

S

Example:  Input channels 1, 2 and 3 are all SD-SDI sources, and output 
channels 1, 2 and 3 are SD-SDI display devices.  Input channels 4, 5 and 6 
are HD-SDI sources and output channels 4, 5 and 6 are HD-SDI devices.  

Establishing groups like these prevents an input from Group 2 from being accidentally 
switched to a Group 1 output.  The type of route and the input source must still be 
established using the Video Switching page.

„

Use the following steps to establish a group:

1.  Define the Group Number by selecting a Group index from the Groups column.

2.  Select the output channels that will be associated with this Group (e.g., outputs 1, 

2 and 3).

3.  Select the input channels that will be associated with this Group (e.g., inputs 1, 2 

and 3).   As these keys are clicked, they will turn yellow.