Справочник Пользователя для ZyXEL Communications P-660RU-Tx

 Chapter 7 Internet Setup

P-660RU-Tx User’s Guide

In the Interface Setup > Internet screen, select Static IP Address from the 
ISP field to display the following screen.

Figure 23   Interface Setup > Internet (Static IP)

The following table describes the labels in this screen.  

Table 13   Interface Setup > Internet (Static IP)

Encapsulation

Select the method of multiplexing used by your ISP from the drop-
down list box. Available options are: 1483 Bridged IP LLC, 1483 
Bridged IP VC-Mux, 1483 Routed IP LLC(IPoA) and 1483 
Routed IP VC-Mux.

Static IP Address

A static IP address is a fixed IP that your ISP gives you. Type your ISP 
assigned IP address in the field.

IP Subnet Mask

Enter a subnet mask in dotted decimal notation. 

Gateway

Specify a gateway IP address (supplied by your ISP).

Bridge Interface

This field is only available when you select 1483 Bridged IP LLC or 
1483 Bridged IP VC-Mux in the Encapsulation field.

Use this field to enable or disable the bridge mode. Activate the bridge 
mode when your ISP provides you with more than one IP address and 
you want the connected computers to get individual IP address from 
ISP’s DHCP server directly.

NAT

Use this field to enable or disable Network Address Translation (NAT).

Default Route

Select Yes to direct traffic not listed in the routing table to the default 
gateway. Select No to drop traffic not listed in the routing table.