Справочник Пользователя для ZyXEL Communications NSA-2401
Chapter 6 Storage Screens
NSA-2401 User’s Guide
154
RAID 1 capacity is limited to the size of the smallest disk in the RAID array. For example, if
you have two disks of sizes 150 GB and 200 GB respectively in one RAID 1 array, then the
maximum capacity is 150 GB and the remaining space (50 GB) is unused.
you have two disks of sizes 150 GB and 200 GB respectively in one RAID 1 array, then the
maximum capacity is 150 GB and the remaining space (50 GB) is unused.
Typical applications for RAID 1 are those requiring high fault tolerance without need of large
amounts of storage capacity or top performance, for example, accounting and financial data,
small database systems, and enterprise servers.
amounts of storage capacity or top performance, for example, accounting and financial data,
small database systems, and enterprise servers.
6.9.5 RAID 10
RAID 10 (RAID 1+0) is a nested RAID where two RAID 1 arrays are stored on the physical
disks with a RAID 0 array on top. It is a stripe of mirrors. RAID 1 provides redundancy while
RAID 0 boosts performance. The following figure shows two disks in two RAID 1 arrays.
Data is duplicated across two disks, so if one disk fails, there is still a a copy of the data. These
two arrays are configured as a single RAID 0 array for faster performance
disks with a RAID 0 array on top. It is a stripe of mirrors. RAID 1 provides redundancy while
RAID 0 boosts performance. The following figure shows two disks in two RAID 1 arrays.
Data is duplicated across two disks, so if one disk fails, there is still a a copy of the data. These
two arrays are configured as a single RAID 0 array for faster performance
.
Typical applications for RAID 10 are those requiring both high performance and reliability
such as enterprise servers and high-end moderate-sized database systems. RAID 10 is often
used in place of RAID 1 or RAID 5 by those requiring higher performance. It may be used
instead of RAID 1 for applications requiring more capacity.
such as enterprise servers and high-end moderate-sized database systems. RAID 10 is often
used in place of RAID 1 or RAID 5 by those requiring higher performance. It may be used
instead of RAID 1 for applications requiring more capacity.
Table 40 RAID 10
RAID 0
RAID 1
RAID 1
A1
A1
A2
A2
A3
A3
A4
A4
A5
A5
A6
A6
A7
A7
A8
A8
DISK 1
DISK 2
DISK 3
DISK 4