Справочник Пользователя для ZyXEL Communications NBG-419N
Chapter 12 Wireless LAN
NBG-419N v2 User’s Guide
108
12.4.3 WPA-PSK/WPA2-PSK
Click Network > Wireless LAN to display the General screen. Select WPA-PSK or WPA2-PSK
from the Security Mode list.
from the Security Mode list.
Figure 76
Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
for descriptions of the other labels in this screen.
12.5 MAC Filter
The MAC filter screen allows you to configure the Router to give exclusive access to devices (Allow)
or exclude devices from accessing the Router (Deny). Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory and consists of six
or exclude devices from accessing the Router (Deny). Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory and consists of six
Table 45
Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK
Compatible
Compatible
This field appears when you choose WPA-PSK2 as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to your
Router.
Router.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer
Update Timer
The Group Key Update Timer is the rate at which the AP sends a new group key out to all
clients.
clients.
Apply
Click Apply to save your changes back to the Router.
Cancel
Click Cancel to reload the previous configuration for this screen.