Справочник Пользователя для ZyXEL Communications ISG50
Chapter 21 IP/MAC Binding
ISG50 User’s Guide
342
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with Ethernet,
bridge, and VLAN interfaces. You can also enable or disable IP/MAC binding and logging in an
interface’s configuration screen.
bridge, and VLAN interfaces. You can also enable or disable IP/MAC binding and logging in an
interface’s configuration screen.
21.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC Binding Summary
screen. This screen lists the total number of IP to MAC address bindings for devices connected to
each supported interface.
screen. This screen lists the total number of IP to MAC address bindings for devices connected to
each supported interface.
Figure 226
Configuration > Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 107
Configuration > Network > IP/MAC Binding > Summary
LABEL
DESCRIPTION
Edit
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
modify the entry’s settings.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific entry.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
Interface
This is the name of an interface that supports IP/MAC binding.
Number of
Binding
Binding
This field displays the interface’s total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
addresses that the interface has assigned by DHCP.
Apply
Click Apply to
save your changes back to the ISG50.