Справочник Пользователя для ZyXEL Communications NWA1100-N
NWA1100-N User’s Guide
105
C
H A P T E R
11
IP Screen
11.1 Overview
This chapter describes how you can configure the IP address of your NWA.
The Internet Protocol (IP) address identifies a device on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to communicate across
the network. These networking devices are also known as hosts.
(including computers, servers, routers, printers, etc.) needs an IP address to communicate across
the network. These networking devices are also known as hosts.
Figure 50
IP Setup
The figure above illustrates one possible setup of your NWA. The gateway IP address is 192.168.1.2
and the IP address of the NWA is 192.168.1.2 (default). The gateway and the device must belong in
the same subnet mask to be able to communicate with each other.
and the IP address of the NWA is 192.168.1.2 (default). The gateway and the device must belong in
the same subnet mask to be able to communicate with each other.
11.2 What You Can Do in this Chapter
11.3 What You Need to Know
The Ethernet parameters of the NWA are preset in the factory with the following values:
1
IP address of 192.168.1.2
2
Subnet mask of 255.255.255.0 (24 bits)