Справочник Пользователя для ZyXEL Communications G-2000 Plus

ZyAIR G-2000 Plus User’s Guide

265 

Chapter 23 LAN Setup

Depending on the protocols for your applications, you need to configure the respective 
Ethernet Setup, as outlined below.

• For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
• For bridging Ethernet setup refer to the Bridging Setup chapter.

Use menu 3.2 to configure your ZyAIR for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 
3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet 
Setup, as shown next

:

                    Menu 3.2 - TCP/IP and DHCP Ethernet Setup

     DHCP= Server                           TCP/IP Setup:
     Client IP Pool:
       Starting Address= 192.168.1.33       IP Address= 192.168.1.1
       Size of Client IP Pool= 32           IP Subnet Mask= 255.255.255.0
     First DNS Server= From ISP             RIP Direction= Both
       IP Address= N/A                        Version= RIP-1
     Second DNS Server= From ISP            Multicast= None
       IP Address= N/A                      Edit IP Alias= No
     Third DNS Server= From ISP
       IP Address= N/A
     DHCP Server Address= N/A

                    Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.

Follow the instructions in the next table on how to configure the DHCP fields.

Table 87   DHCP Ethernet Setup Fields

DHCP

This field enables/disables the DHCP server.
If set to Server, your ZyAIR will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay the ZyAIR acts as a surrogate DHCP server and relays requests and 

responses between the remote server and the clients.
When set to Server, the following items need to be set:

Client IP Pools

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.