Справочник Пользователя для ZyXEL Communications G-2000 Plus

ZyAIR G-2000 Plus User’s Guide

Chapter 2 Introducing the Web Configurator

44

This chapter describes how to access the ZyAIR web configurator and provides an overview 
of its screens. The default IP address of the ZyAIR is 192.168.1.1. 

The embedded web configurator (ewc) allows you to manage the ZyAIR from anywhere 
through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet 
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It 
is recommended that you set your screen resolution to 1024 by 768 pixels. The screens you see 
in the web configurator may vary somewhat from the ones shown in this document due to 
differences between individual firmware versions.

1 Make sure your ZyAIR hardware is properly connected and prepare your computer/

computer network to connect to the ZyAIR (refer to the Quick Start Guide).

L

aunch your web browser.

Type

 "192.168.1.1" as the URL.

Type

 "1234" (default) as the password and click Login. In some versions, the default 

password appears automatically - if this is the case, click Login. 

You 

should see a screen asking you to change your password (highly recommended) as 

shown next. Type a new password (and retype it to confirm) and click Apply or click 
Ignore.

Note: If you do not change the password, the following screen 
appears every time you login.