Справочник Пользователя для ZyXEL Communications ZyWALL 300
ZyWALL USG 300 User’s Guide
649
C
H A P T E R
4 9
Reboot
Use this to restart the device (for example, if the device begins behaving erratically). See also
for information on different ways to start and stop the ZyWALL.
If you applied changes in the Web configurator, these were saved automatically and do not
change when you reboot. If you made changes in the CLI, however, you have to use the
change when you reboot. If you made changes in the CLI, however, you have to use the
write
command to save the configuration before you reboot. Otherwise, the changes are lost
when you reboot.
) reset returns the device to its
default configuration.
The Reboot screen is part of the Web configurator so that remote users can restart the device.
To access this screen, click Maintenance > Reboot.
To access this screen, click Maintenance > Reboot.
Figure 482 Maintenance > Reboot
Click the Reboot button to restart the device. Wait a few minutes until the login screen
appears. If the login screen does not appear, type the IP address of the device in your Web
browser.
appears. If the login screen does not appear, type the IP address of the device in your Web
browser.
You can also use the CLI command
reboot
to restart the device.