Справочник Пользователя для ZyXEL Communications ZLD
Chapter 20 Application Patrol
ZyWALL (ZLD) CLI Reference Guide
164
The following sections list the application patrol commands.
20.2.1 Pre-defined Application Commands
This table lists the commands for each pre-defined application.
20.2.2 Rule Commands for Pre-defined Applications
This table lists the commands for rules in each pre-defined application.
zone_name
The name of a zone. You may use 1-31 alphanumeric characters, underscores(
_
), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
schedule_name
The name of a schedule. You may use 1-31 alphanumeric characters, underscores(
_
), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
Table 81
Input Values for Application Patrol Commands (continued)
LABEL
DESCRIPTION
Table 82
app Commands: Pre-Defined Applications
COMMAND
DESCRIPTION
[no] app protocol_name activate
Enables application patrol for the specified application. The
no
command disables application patrol for the specified application.
[no] app protocol_name allowport <1..65535>
If the default action is drop or reject. Adds the specified port to the
list of ports that are forwarded in spite of the default action. The
list of ports that are forwarded in spite of the default action. The
no
command removes the specified port from the list.
app protocol_name bandwidth <0..102400>
Specifies the bandwidth limit (in kilobits per second) for the specified
application.
application.
bandwidth-graph
[no] app protocol_name bwm
Turns on bandwidth management for the specified application. The
no
command turns off bandwidth management for the specified
application.
[no] app protocol_name defaultport
<1..65535>
For port-base applications. Adds the specified port to the list of ports
used to identify the specified application. This port number can only
be included in one application’s list. The
used to identify the specified application. This port number can only
be included in one application’s list. The
no
command removes the
specified port from the list.
app protocol_name {forward | drop | reject}
Specifies what action the ZyWALL should take when it identifies this
application.
application.
app protocol_name mode {portless | portbase}
Specifies how the ZyWALL identifies this application.
[no] app protocol_name log [alert]
Creates log entries (and alerts) for the specified application. The
no
command does not create any log entries.
Table 83
app Commands: Rules in Pre-Defined Applications
COMMAND
DESCRIPTION
app protocol_name rule insert rule_number
Creates a new rule at the specified row and enters sub-command
mode. See
mode. See
for the sub-commands.
app protocol_name rule append
Creates a new rule, appends it to the end of the list, and enters sub-
command mode. See
command mode. See
for the sub-commands.
app protocol_name rule rule_number
or
app protocol_name rule modify rule_number
Enters sub-command mode for editing the rule at the specified row.
See
See
for the sub-commands.