Справочник Пользователя для ZyXEL Communications ZyWALL 1000
Chapter 1 Introducing the ZyWALL
ZyWALL USG 1000 User’s Guide
55
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the ZyWALL. You can access it
using remote management (for example, SSH or Telnet) or via the console port. See the
Command Reference Guide for more information about the CLI.
using remote management (for example, SSH or Telnet) or via the console port. See the
Command Reference Guide for more information about the CLI.
Console Port
You can use the console port to manage the ZyWALL. You have to use CLI commands, which
are explained in the Command Reference Guide.
The default settings for the console port are as follows.
are explained in the Command Reference Guide.
The default settings for the console port are as follows.
1.4 Starting and Stopping the ZyWALL
This section explains some of the ways to start and stop the ZyWALL. These are summarized
below.
below.
Table 2 Managing the ZyWALL: Console Port
SETTING
VALUE
Speed
115200 bps
Data Bits
8
Parity
None
Stop Bit
1
Flow Control
Off
Table 3 Starting and Stopping the ZyWALL
METHOD
DESCRIPTION
Turning on the power button
A cold start occurs when you turn on the power to the ZyWALL.
The ZyWALL powers up, checks the hardware, and starts the
system processes.
Rebooting the ZyWALL
A warm start (without powering down and powering up again)
occurs when you use the Reboot button in the Reboot screen or
when you use the
reboot
command. The ZyWALL writes all
cached data to disk, stops the system processes, and then does a
warm start.
Using the RESET button
If you press the RESET button, the ZyWALL sets the configuration
to its default values and then reboots.
Using the
shutdown
command
The
shutdown
command writes all cached data to disk and
stops the system processes. It does not turn off the power.You
have to turn the power off and on manually to start the ZyWALL
again. You should use this command before you turn off the
ZyWALL.
Turning off the power button
Power off occurs when you turn off the power to the ZyWALL. The
ZyWALL simply turns off. It does not stop the system processes or
write cached data to disk.