Справочник Пользователя для ZyXEL Communications 5 Series
Chapter 9 WAN Screens
ZyWALL 5/35/70 Series User’s Guide
198
Figure 110 Traffic Redirect LAN Setup
9.6 Configuring the Traffic Redirect Screen
To change your ZyWALL’s traffic redirect settings, click NETWORK > WAN > Traffic
Redirect. The screen appears as shown.
Redirect. The screen appears as shown.
"
For the ZyWALL 5, if the traffic redirect feature does not work after you
configure the ZyWALL’s traffic redirect settings in the Traffic Redirect screen,
you may need to turn on the WAN ping check by entering sys rn pingDrop
in the command interpreter. See the CLI Reference Guide.
configure the ZyWALL’s traffic redirect settings in the Traffic Redirect screen,
you may need to turn on the WAN ping check by entering sys rn pingDrop
in the command interpreter. See the CLI Reference Guide.
Figure 111 NETWORK > WAN > Traffic Redirect
The following table describes the labels in this screen.
Table 46 NETWORK > WAN > Traffic Redirect
LABEL
DESCRIPTION
Active
Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
connection goes down.
Backup
Gateway IP
Address
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.