Справочник Пользователя для ZyXEL Communications 5 Series

Chapter 10 DMZ Screens

ZyWALL 5/35/70 Series User’s Guide

Use the Port Roles screen to set ports as part of the LAN, DMZ and/or WLAN interface. 

See 

 for more information on port roles.

To change your ZyWALL’s port role settings, click NETWORK > DMZ > Port Roles. The 
screen appears as shown.

The radio buttons correspond to Ethernet ports on the front panel of the ZyWALL. On the 
ZyWALL 70, ports 1 to 4 are all DMZ ports by default. On the ZyWALL 5 or ZyWALL 35, 
ports 1 to 4 are all LAN ports by default. 

"

Your changes are also reflected in the LAN and/or WLAN Port Roles 
screens.

Figure 120   NETWORK > DMZ > Port Roles 

The following table describes the labels in this screen. 

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.

Table 52   NETWORK > DMZ > IP Alias (continued)

Table 53   NETWORK > DMZ > Port Roles

LAN

Select a port’s LAN radio button to use the port as part of the LAN. The port will 
use the ZyWALL’s LAN IP address and MAC address.

DMZ

Select a port’s DMZ radio button to use the port as part of the DMZ. The port will 
use the ZyWALL’s DMZ IP address and MAC address.

WLAN

Select a port’s WLAN radio button to use the port as part of the WLAN.
The port will use the ZyWALL’s WLAN IP address and MAC address.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.