Справочник Пользователя для ZyXEL Communications 5 Series
Chapter 12 Wireless Screens
ZyWALL 5/35/70 Series User’s Guide
235
Figure 131 WIRELESS > Wi-Fi > Wireless Card: Static WEP
The following table describes the wireless LAN security labels in this screen.
12.2.2 WPA-PSK
Click WIRELESS > Wi-Fi > Wireless Card to display the Wireless Card screen. Select
WPA-PSK from the Security list.
WPA-PSK from the Security list.
Table 59 WIRELESS > Wi-Fi > Wireless Card: Static WEP
LABEL
DESCRIPTION
Security
Select Static WEP from the drop-down list.
WEP
Encryption
Encryption
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters
(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the same
on the access points as they are on the wireless stations.
key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the same
on the access points as they are on the wireless stations.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.