Справочник Пользователя для ZyXEL Communications 5 Series

 Chapter 12 Wireless Screens

ZyWALL 5/35/70 Series User’s Guide

The MAC filter screen allows you to configure the ZyWALL to give exclusive access to 
specific devices (Allow Association) or exclude specific devices from accessing the 
ZyWALL (Deny Association). You need to know the MAC addresses of the devices to 
configure this screen.

To change your ZyWALL’s MAC filter settings, click WIRELESS > Wi-Fi > MAC Filter. 
The screen appears as shown.

Figure 138   WIRELESS > Wi-Fi > MAC Filter

The following table describes the labels in this menu.

Table 66   WIRELESS > Wi-Fi > MAC Filter

Active

Select or clear the check box to enable or disable MAC address filtering.
Enable MAC address filtering to have the router allow or deny access to wireless 
stations based on MAC addresses. Disable MAC address filtering to have the router not 
perform MAC filtering on the wireless stations.

Association 

Define the filter action for the list of MAC addresses in the MAC address filter table. 
Select Deny to block access to the router, MAC addresses not listed will be allowed to 
access the router. Select Allow to permit access to the router, MAC addresses not 
listed will be denied access to the router.

#

This is the index number of the MAC address.

User Name

Enter a descriptive name for the MAC address.

MAC 
Address

Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless stations that 
are allowed or denied access to the ZyWALL in these address fields. 

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.