Справочник Пользователя для ZyXEL Communications 5 Series

 Chapter 27 Remote Management Screens

ZyWALL 5/35/70 Series User’s Guide

6a  Click REMOTE MGMT. Write down the name of the certificate displayed in the 

Server Certificate field. 

6b Click CERTIFICATES. Find the certificate and check its Subject column. CN 

stands for certificate’s common name (see 

for an example).

Use this procedure to have the ZyWALL use a certificate with a common name that matches 
the ZyWALL’s actual IP address. You cannot use this procedure if you need to access the 
WAN port and it uses a dynamically assigned IP address.

6a  Create a new certificate for the ZyWALL that uses the IP address (of the 

ZyWALL’s port that you are trying to access) as the certificate’s common name. 
For example, to use HTTPS to access a LAN port with IP address 192.168.1.1, 
create a certificate that uses 192.168.1.1 as the common name.

6b Go to the remote management WWW screen and select the newly created certificate 

in the Server Certificate field. Click Apply. 

After you accept the certificate, the ZyWALL login screen appears. The lock displayed in the 
bottom right of the browser status bar denotes a secure connection.

Figure 284   Example: Lock Denoting a Secure Connection

Click Login and you then see the next screen.

The factory default certificate is a common default certificate for all ZyWALL models.

Figure 285   Replace Certificate

Click Apply in the Replace Certificate screen to create a certificate using your ZyWALL’s 
MAC address that will be specific to this device. Click CERTIFICATES to open the My 
Certificates screen. You will see information similar to that shown in the following figure.