Справочник Пользователя для ZyXEL Communications 5 Series
Chapter 27 Remote Management Screens
ZyWALL 5/35/70 Series User’s Guide
509
"
It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
for secure connections.
Figure 307 ADVANCED > REMOTE MGMT > Telnet
The following table describes the labels in this screen.
27.8 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the ZyWALL’s firmware
and configuration files, please see
and configuration files, please see
on firmware and configuration file
maintenance for details. To use this feature, your computer must have an FTP client.
To change your ZyWALL’s FTP settings, click ADVANCED > REMOTE MGMT > FTP.
The screen appears as shown. Use this screen to specify which interfaces allow FTP access
and from which IP address the access can come.
The screen appears as shown. Use this screen to specify which interfaces allow FTP access
and from which IP address the access can come.
Table 151 ADVANCED > REMOTE MGMT > Telnet
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using
this service.
this service.
Secure Client IP
Address
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.