Справочник Пользователя для ZyXEL Communications 5 Series
Chapter 34 Introducing the SMT
ZyWALL 5/35/70 Series User’s Guide
606
Figure 359 Initial Screen
34.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.
shown below.
For your first login, enter the default password “1234”. As you type the password, the screen
displays an “X” for each character you type.
displays an “X” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,
press [ENTER] to bring up the login screen again.
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,
press [ENTER] to bring up the login screen again.
Figure 360 Password Screen
34.3 Navigating the SMT Interface
The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
configuration are listed in the table below.
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:A0:C5:01:23:45
initialize ch =1, ethernet address: 00:A0:C5:01:23:46
initialize ch =2, ethernet address: 00:A0:C5:01:23:47
initialize ch =3, ethernet address: 00:A0:C5:01:23:48
initialize ch =4, ethernet address: 00:00:00:00:00:00
AUX port init . done
Modem init . inactive
Press ENTER to continue...
Enter Password : XXXX
Table 207 Main Menu Commands
OPERATION
KEYSTROKES
DESCRIPTION
Move down
to another
menu
to another
menu
[ENTER]
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
submenu and press [ENTER].
Move up to a
previous
menu
previous
menu
[ESC]
Press the [ESC] key to move back to the previous menu.
Move to a
“hidden”
menu
“hidden”
menu
Press [SPACE
BAR] to change
No to Yes then
press [ENTER].
BAR] to change
No to Yes then
press [ENTER].
Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [SPACE BAR] to change No to Yes,
and then press [ENTER] to go to a “hidden” menu.
default setting of No. Press [SPACE BAR] to change No to Yes,
and then press [ENTER] to go to a “hidden” menu.