Справочник Пользователя для ZyXEL Communications 5 Series
Chapter 40 Route Setup
ZyWALL 5/35/70 Series User’s Guide
651
40.4 Route Failover
This menu allows you to configure how the ZyWALL uses the route assessment ping check
function.
function.
Figure 394 Menu 6.3: Route Failover
The following table describes the fields in this menu.
Menu 6.3 - Route Failover
Period= 5
Timeout=: 3
Fail Tolerance= 3
Press ENTER to Confirm or ESC to Cancel:
Table 232 Menu 6.3: Route Failover
FIELD
DESCRIPTION
Period
Type the number of seconds for the ZyWALL to wait between checks to see if it
can connect to the WAN IP address (in the Check Point field of menu 6.1) or the
default gateway. Allow more time if your destination IP address handles lots of
traffic.
can connect to the WAN IP address (in the Check Point field of menu 6.1) or the
default gateway. Allow more time if your destination IP address handles lots of
traffic.
Timeout
Type the number of seconds for your ZyWALL to wait for a ping response from the
IP address in the Check Point field of menu 6.1 before it times out. The WAN
connection is considered "down" after the ZyWALL times out the number of times
specified in the Fail Tolerance field. Use a higher value in this field if your network
is busy or congested.
IP address in the Check Point field of menu 6.1 before it times out. The WAN
connection is considered "down" after the ZyWALL times out the number of times
specified in the Fail Tolerance field. Use a higher value in this field if your network
is busy or congested.
Fail Tolerance
Type the number of times your ZyWALL may attempt and fail to connect to the
Internet before traffic is forwarded to the backup gateway.
Internet before traffic is forwarded to the backup gateway.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.
save your configuration, or press [ESC] at any time to cancel.