Справочник Пользователя для ZyXEL Communications 5 Series

Chapter 49 Firmware and Configuration File Maintenance

ZyWALL 5/35/70 Series User’s Guide

Figure 474   Telnet Into Menu 24.7.1: Upload System Firmware 

You see the following screen when you telnet into menu 24.7.2.

Figure 475   Telnet Into Menu 24.7.2: System Maintenance 

To upload the firmware and the configuration file, follow these examples

 Menu 24.7.1 - System Maintenance - Upload System Firmware

 To upload the system firmware, follow the procedure below:

   1. Launch the FTP client on your workstation.

   2. Type "open" and the IP address of your system.  Then type "admin" 

and SMT password as requested.

   3. Type "put firmwarefilename ras" where "firmwarefilename" is the 

name of your firmware upgrade file on your workstation and "ras" is the 

remote file name on the system.

   4. The system reboots automatically after a successful firmware 

upload.

For details on FTP commands, please consult the documentation of your 

FTP client program. For details on uploading system firmware using TFTP 

(note that you must remain on this menu to upload system firmware using 

TFTP), please see your manual.

Press ENTER to Exit:

Menu 24.7.2 - System Maintenance - Upload System Configuration File

  To upload the system configuration file, follow the procedure below:

    1. Launch the FTP client on your workstation.

    2. Type "open" and the IP address of your system. Then type "admin" 

and SMT password as requested.

    3. Type "put configurationfilename rom-0" where 

"configurationfilename" is the name of your system configuration file on 

your workstation, which will be transferred to the "rom-0" file on the 

system.

    4. The system reboots automatically after the upload system 

configuration file process is complete.

For details on FTP commands, please consult the documentation of your 

FTP client program. For details on uploading configuration file using 

TFTP (note that you must remain on this menu to upload configuration 

file using TFTP), please see your manual.

Press ENTER to Exit: