Справочник Пользователя для ZyXEL Communications 5 Series
ZyWALL 5/35/70 Series User’s Guide
739
C
H A P T E R
5 0
System Maintenance Menus 8 to
10
This chapter leads you through SMT menus 24.8 to 24.10.
50.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a
serial connection to the console port, although some commands are only available with a serial
connection. See the CLI Reference Guide for information on the commands. Enter 8 from
Menu 24 - System Maintenance.
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a
serial connection to the console port, although some commands are only available with a serial
connection. See the CLI Reference Guide for information on the commands. Enter 8 from
Menu 24 - System Maintenance.
"
Use of undocumented commands or misconfiguration can damage the unit
and possibly render it unusable.
and possibly render it unusable.
Figure 481 Command Mode in Menu 24
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: