Справочник Пользователя для ZyXEL Communications 5 Series

 Chapter 3 Introducing the Web Configurator

ZyWALL 5/35/70 Series User’s Guide

Click the icon in the Show Statistics screen. This screen shows you a line chart of each port’s 
throughput statistics.

Figure 18   HOME > Show Statistics > Line Chart

Status

For the WAN interface(s) and the Dial Backup port, this displays the port speed and 
duplex setting if you’re using Ethernet encapsulation or the remote node name for a 
PPP connection and Down (line is down or not connected), Idle (line (ppp) idle), 
Dial (starting to trigger a call) or Drop (dropping a call) if you’re using PPPoE 
encapsulation. Dial backup is not available in bridge mode.
For the LAN, DMZ and WLAN ports, this displays the port speed and duplex setting. 
For the WLAN card, this displays the transmission rate when a wireless LAN card is 
inserted and WLAN is enabled or Down when a wireless LAN is not inserted or 
WLAN is disabled.

TxPkts

This is the number of transmitted packets on this port.

RxPkts

This is the number of received packets on this port.

Tx B/s

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time

This is the total amount of time the line has been up.

System Up Time

This is the total time the ZyWALL has been on.

Automatic 
Refresh Interval 

Select a number of seconds or None from the drop-down list box to update all 
screen statistics automatically at the end of every time interval or to not update the 
screen statistics.

Refresh

Click this button to update the screen’s statistics immediately.

Table 8   HOME > Port Statistics (continued)