Справочник Пользователя для ZyXEL Communications ZyXEL G-1000 v2
ZyXEL G-1000 v2 User’s Guide
132
Chapter 18 Troubleshooting
Problems with the Password
Problems with the WLAN Interface
Table 60 Troubleshooting the Password
PROBLEM
CORRECTIVE ACTION
I cannot access the
G-1000 v2.
The Password and Username fields are case-sensitive. Make sure that you enter the
correct password and username using the proper casing.
Use the RESET button on the top panel of the G-1000 v2 to restore the factory default
Use the RESET button on the top panel of the G-1000 v2 to restore the factory default
configuration file (hold this button in for about 10 seconds or until the link light turns
red). This will restore all of the factory defaults including the password.
Table 61 Troubleshooting the WLAN Interface
PROBLEM
CORRECTIVE ACTION
Cannot access the
G-1000 v2 from the
WLAN.
Make sure the link light on the ZyXEL device is on.
Check that both the G-1000 v2 and your wireless station are using the same security
Check that both the G-1000 v2 and your wireless station are using the same security
settings. Refer to
to confirm your settings.
I cannot ping any
computer on the
WLAN.
Make sure the link light on the ZyXEL device is on.
Make sure the wireless adapter on the wireless station(s) is working properly.
Check that both the G-1000 v2 and wireless station(s) are using the same
Make sure the wireless adapter on the wireless station(s) is working properly.
Check that both the G-1000 v2 and wireless station(s) are using the same
Name(SSID), channel and WEP keys (if WEP encryption is activated).