Справочник Пользователя для ZyXEL Communications ZyXEL G-1000 v2
ZyXEL G-1000 v2 User’s Guide
Chapter 3 Wizard Setup
43
The following table describes the labels in this screen.
Note: The wireless stations and G-1000 v2 must use the same SSID, channel ID and
WEP encryption key (if WEP is enabled) or WPA-PSK (if WPA-PSK is enabled)
for wireless communication.
for wireless communication.
3.3.2 Configuring WEP or WPA(2) PSK Security
Choose Basic (WEP) security to setup WEP Encryption parameters.
Table 9 Enter Name and Select Security
LABEL
DESCRIPTION
Wireless LAN Setup
Name(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the G-1000 v2, make sure all wireless stations use
If you change this field on the G-1000 v2, make sure all wireless stations use
the same SSID in order to access the network.
Choose Channel ID
To manually set the G-1000 v2 to use a specific channel, select a channel from
the drop-down list box.
Security
The level of Security can be selected as none, basic or extended. Choose
None security to have no wireless LAN security configured and proceed to the
section.
Choose Basic (WEP) security if you want to configure WEP Encryption
parameters.
Choose Extend (WPA-PSK with customized key) or Extend (WPA2-PSK
Choose Extend (WPA-PSK with customized key) or Extend (WPA2-PSK
with customized key) security to configure a Pre-Shared Key.
The next screen varies depending on which security level you select.
The next screen varies depending on which security level you select.
Back
Click Back to return to the previous screen.
Next
Click Next to continue.
Exit
Click Exit to quit the wizard without saving the changes.