Справочник Пользователя для Technicolor - Thomson 210i

 

♦ 

 

Use only the power adapter supplied by THOMSON (16-18 VAC/1A)
Using an incorrectly rated power adapter will result in damage to the router. 

 

♦ 

Know the type of interface provided by your ISP or telecom. The standard model 
only supports the ISDN BRI S/T-

 

interface.

 

If you are an ISDN S/T-interface user,

 you should have an NT-1 or NT-1 plus provided by your ISP or telecom.

Also, make sure the ISDN line is available.

 

♦ 

In case of emergency, unplug the power adapter first. 

 

♦ 

Locate the device in a clean location. Do not block the ventilating slots on the rear 
panel. 

 

♦ 

Cables must be attached to the correct ports; to do otherwise may result in damage to 
the router. Keep cables away from walkways. 

 

♦ 

If you use S/T-interface, do not extend the ISDN line greater than 100 meters from 
the NT-1 (NT-1 plus) box and the router. 

 

♦ 

If you use DSL/Cable, check that your subscribed DSL/Cable modem supports the 
Ethernet interface for connecting to your PC. If not, you will be unable to connect it to 
the router. 

 

If you do not have an ISDN line installed already, we suggest that you order it from your 
telephone company as soon as possible to avoid the long waiting period common when 
ordering a new line. Use the information in this section to place the order.  If you have 
already installed your ISDN line, you can check the following section to make sure that 
you can use all the features of your SpeedTouch 210i. 

1.  Contact your local telephone company’s ISDN Ordering Center. 

2.  Make sure DSS1 switches are available since these are the only switch types currently 

supported by the SpeedTouch 210i.  

3.  When the telephone company installs your ISDN line, be sure to obtain the following 

information: